Sponsrat innehåll från Hanwha

 

Status with Hanwha Semitech / Cynergy placement solution at GP Electronics after 18 months

The recently increasing trend within the electronics assembly industry has been to return to local manufacturing due to geopolitics, time to market, cost to market and the increasing need for flexibility at the same time as demanding higher volumes. These are well known and widely reported factors, but which specific demands does this place on manufacturers across Europe, the Nordics and Baltics?

Sponsrat innehåll från Hanwha

 

Status with Hanwha Semitech / Cynergy placement solution at GP Electronics after 18 months

The recently increasing trend within the electronics assembly industry has been to return to local manufacturing due to geopolitics, time to market, cost to market and the increasing need for flexibility at the same time as demanding higher volumes. These are well known and widely reported factors, but which specific demands does this place on manufacturers across Europe, the Nordics and Baltics?

Sponsrat innehåll från Elhurt EMS

 

Adaptability, Experience, and Proximity: Key Advantages of Elhurt EMS for Demanding Clients

Collaboration with the largest EMS (Electronic Manufacturing Services) providers offers certain benefits; however, for many companies—especially those with more specific requirements - this approach can present specific challenges. Large corporations, serving many clients simultaneously, may struggle to dedicate sufficient attention to each project, especially for complex and custom undertakings. Issues such as delayed responses, lack of dedicated contacts, limited access to technical support, and lengthy decision-making processes often negatively impact project execution.

Sponsrat innehåll från CODICO GmbH

 

DINKLE: A New Tool-Free Solution With Many Advantages - Series 0274

There is no longer any room for screwdrivers in modern PCB terminal wiring. The 0274 series is a tool-less terminal specifically designed for charging applications.

Sponsrat innehåll från congatec GmbH

 

Multitasking at the edge

In the past, there was rarely a need to put much emphasis on a high number of cores as most established embedded systems had little parallel processing to do. With Industry 4.0 and IIoT digitization, this picture has dramatically changed. IoT gateways and edge computers can hardly get enough cores. COM Express Type 6 modules with AMD Ryzen Embedded V2000 processor technology and RTS hypervisor support are a perfect for these IoT gateway application needs

Sponsrat innehåll från TME

 

New offer of professional solders by STANNOL

Safe and lead-free soldering materials available in the TME catalogue.

Sponsrat innehåll från CODICO GmbH

 

Accelerating time to market for Robotics and Intelligent Camera products with Thundercomm SOM’s

In Europe like the rest of the world we are witnessing an explosion in robotics and automation technologies adoption. Intense competition and an aging workforce across a broad set of industries from manufacturing to farming to logistics and retail is forcing companies to incorporate these systems to improve efficiency and speed up productivity.

Sponsrat innehåll från TME

 

Passive and electromechanical elements from Panasonic

Overview of the basic components from the Japanese manufacturer.

Sponsrat innehåll från CODICO GmbH

 

Displays in IoT applications

Even if we are not always aware of it, today were are surrounded by devices and sensors that communicate over the Internet. Many of these are equipped with displays, which provide users with on-site information and also allow for easier operation. CODICO has been dealing with the topic if IoT from the perspective of wireless transmission for quite some time, so it's more than natural to now also look at the displays involved.

Sponsrat innehåll från congatec AG

 

Low-power flagship for artificial intelligence

congatec is expanding its SMARC platform with a new module with an NXP i.MX 8M Plus processor especially for embedded AI applications. Thanks to the extensive ecosystem with application-ready 3.5-inch carrier board, Basler cameras, and AI software stack, fast proof of concept is possible.

Sponsrat innehåll från congatec AG

 

Rugged four-legged robot with three brains

ANYbotics provides solutions for robot applications with the most advanced mobility and autonomy requirements in challenging terrains. The massive embedded computing performance for the key tasks – situational awareness, motion control and mission fulfillment – is delivered by three COM Express Computer-on-Modules from congatec.

Sponsrat innehåll från Broadband Tecchnology AB – A CODICO Company

 

Leakage current sensors for charging stations

Every household has one Most people are familiar with the residual current device (RCD) from their fuse box in the basement. Though one will find several old buildings still equipped with safety fuses and cabling without earth wire, they are becoming increasingly rare. This is fortunate, since the task of the safety fuse or the circuit breaker is limited to protecting the powerlines from overcurrent, i.e. it constitutes a fire protection measure. The RCD, on the other hand, directly protects humans against fatal electric shocks. It compares whether the amount of current flowing out of the circuit is equal to the amount that flowed in. Any deviation points out to the presence of a leakage current which...

Sponsrat innehåll från congatec AG

 

Embedded edge computing - Requirements have increased

Today, embedded computers are often deployed as edge computers. This is not just a buzzword but the answer to increased demands for IIoT-connected devices, machines and systems. Intel and congatec are addressing these new challenges with an extended ecosystem that is strongly geared towards concrete solutions and goes far beyond core processor functions.